Wednesday, December 23rd, 2009 at
12:33 pm

Product Description
The MiniTT1 transmitter is a low-profile unit that slides directly into the camera’s hot shoe. It takes the complex TTL flash data sent through the camera’s hot shoe contacts and transmits it in a secure, unique PocketWizard radio signal. Flash units must be mounted on a FlexTT5 transceiver (ordered sepretaly) for TTL operation or any PocketWizard unit for manual operation. Shoot up to 1/8000 sec. with high-speed flash sync or up to 1/500 sec. with full power fl… More >>
- Full ETTL II /iTTL Autoflash and Ratio flash and exposure tracking
- FP/High speed flash synch up to 1/800th sec.
- Autoflash sequences up to 8 frames per second
- Triggers flash or cameras
- Works with all Pocket Wizard 32 channels and zones
PocketWizard MiniTT1 Radio Transmitter for Canon TTL Flashes and Digital SLR Cameras
Monday, December 21st, 2009 at
11:39 am

Product Description
The PocketWizard Plus II transceiver system does more than cut the cord. The PocketWizard Plus II can wirelessly trigger lights and/or cameras within a range of 1600 feet of the transceiver. Utilizing advanced wireless technologies, four 16-bit, digitally-coded channels are available for selective firing of lights, or when working in ‘crowded’ environments. If speed is a concern, images can be captured at a rate of up to 12 frames-per-second, which outpaces most… More >>
- Fast ‘plug-and-play’ set-up times
- Auto-Sensing Transceiver Technology enables the Plus II to switch back and forth between transmitter and receiver modes
- Auto-Relay Mode wirelessly triggers remotely located cameras and flashes within a 1600′ range of one another
- Four 16-bit, digitally-coded channels enable you to simultaneously trigger all of you lights at once, or isolate one group of lights from another
- Ultra-fast microprocessors enable trigger-response times as short as 1/2000th of a second
PocketWizard PWP-TR 801-125 PLUS II Transceiver